Casio Rock manual Adding a Phone Number to an Existing Contact, Pause or Add Wait

6.Select the entered phone number field and press the Right Soft Key [Options] to select one of the following options:

Set Speed Dial/Set As Default/Add 2-Sec Pause/Add Wait

•To add the Contact entry to the Speed Dial list, press Set Speed Dial. Select the desired Speed Dial digit by using the keypad or by scrolling to highlight it, then press the Center Select Key [SET]. Press the Center Select Key [OK] to select Yes.

•To set the phone number as the Default Number, press Set As Default, then press the Center Select Key [OK] to select Yes.

•To add a pause to an existing number, press Add 2-Sec

Pause or Add Wait.

NOTE

The initial phone number entered when the new Contact is created becomes the Default Number. If more than one number is entered for the Contact entry, another number can be selected as the Default Number.

7.After entering the information as necessary, press the Center Select Key [SAVE] to save.

8.CONTACT SAVED appears on the display. The phone number reappears on screen. Press the End/Power Key to exit, or press the Send Key to make a call to the displayed phone number.

Adding a Phone Number to an Existing Contact

1.From idle mode, enter the phone number (up to 48 characters) you want to register.

2.Press the Left Soft Key [Save], then press Update Existing.

3.Scroll to the existing Contact entry you want to update, then press the Center Select Key [OK].

CONTACTS

47