146
SETTINGS & TOOLS
Messages: Incoming Messages/Outgoing Messages
For Incoming Messages, set Allow All/Block All.
For Outgoing Messages, set Allow All/Block All.
Dial-Up Modem: Allow/Block
To set any of the submenus, press the Center Select Key [SET].
Phone Lock Setting
This setting specifies whether the handset should be l ocked
whenever it is turned on.
Lock Mode prevents the unauthorized use of your handset. Onc e
the handset is locked, it is in restricted mode until the Lock Code is
entered. When in Lock Mode, you can only receive a phon e call, make
a 911 call, or call an (In Case of Emergency) ICE contact. You can
change the Lock Code using the Security menu.
1. From idle mode, press the Center S elect Key [MENU], select
Settings & Tools, then press the Center Sel ect Key [OK]. Press
Phone Settings, Security.
2. Enter the four-digit Lock Code, then press the Center Sel ect Key
[OK]. The default Lock Code is the last 4 digits of your phone
number.
3. Press Phone Lock Setting.
4. Select one of the following settings, then press the Center S elect
Key [SET].
Unlocked: Your handset is unlocked.
On Power Up: Your handset will be locked when it is turned on.
Lock Phone Now
1. From idle mode, press the Center S elect Key [MENU], select
Settings & Tools, then press the Center Sel ect Key [OK]. Press
Phone Settings, Security.
I
I