Casio Rock manual 114, Tools, G’zGEAR, Walking Counter

SETTINGS & TOOLS

•Direction readings taken in any of the following locations may result in a large margin of error.

-Near buildings (especially ferro-concrete structures), large metal objects (trains, motor vehicles, etc.), high-voltage power lines, or overhead wires

-Near metal objects (desks, lockers, etc.), household appliances (TVs, computers, speakers, etc.), or permanent magnets (magnetic necklaces, etc.)

If you suspect a reading error, move away from the above locations and try again.

Walking Counter

In Pedometer mode, the number of steps you walked in a day is measured with the pedometer to display the distance you walked and the estimated amount of calories you burned.

In Virtual Trek mode, the amount of trail you traveled is displayed based on the distance calculated from the number of steps. The current position on the trail, the achieved percentage, and the milestones on the trail are displayed on the screen.

1.From idle mode, press the Center Select Key [MENU], select Settings & Tools, then press the Center Select Key [OK]. Press

Tools, G’zGEAR, Walking Counter.

2.The following keys are available in the WALKING COUNTER:

•Directional Key 'left or right: Switches the mode.

•Directional Key "up or down: Selects the date.

•Center Select Key [WEEK/MONTH/DAY]: Switches to display the total number of steps walked by weeks, months or days. (Only in Pedometer mode)

•Right Soft Key [Options]: Displays the following options:

About: Displays the description of the Walking Counter tool.

Pedometer: Switches to Pedometer mode.

Virtual Trek: Switches to Virtual Trek mode.

114