NEC VT 300 Series manual Click Continue. The following take place

Note: Some older software may not work in a Windows 95 or Windows 98 system configured for FAT 32. In addition, select FAT16 if a dual- boot system (with Windows 95 or Windows 98 and Windows NT 4.0) is desired.

4.A FAT 16 or FAT 32 Partition warning screen appears indicating that the system is about to partition and format your hard drive using the FDISK program. This warning screen contains three options: Back, Exit, and Continue.

5.Click Continue. The following take place:

system performs FDISK

system reboots

Tpartitions are formatted

OS and drivers load from the CD

The “Operating System Restore Completed” screen appears when all files have been restored.

6.Remove the CD from the CD tray.

7.Click OK to reboot.

This completes the Auto Rebuild and Restore procedure.

See “NEC Application and Driver CD” for instructions on installing any of the applications or online documents, or to install device drivers that did not come with your system.

Restore any application or driver that was not provided by NEC by using the vendor diskette(s) or CD-ROM(s) included in its original packaging.

Configuring the System 3-25