You forgot your password and need to clear it.
TYou need to restore the CMOS settings to the factory state.
Your BIOS is corrupted and you must perform a BIOS Recovery. This is performed with a BIOS Recovery diskette and is seldom required. If it is, contact NEC CSD Technical Support for assistance (see Section 6 for information on contacting Technical Support).
You can obtain the BIOS Recovery program by downloading it to a diskette from the NEC CSD Bulletin Board System (BBS), the NEC CSD File Transfer Protocol (FTP) site, or the NEC CSD website. See Chapter 6 for information on downloading.
The following figure shows system board jumpers.
Locating system board jumpers
A – Power On Mode Jumper JP1 | C – Clear CMOS Jumper JBAT1 |
B – Processor/Bus Speed Jumpers SW1 |
|
