NEC VT 300 Series manual Removing the Pentium II Processor, 4-24Installing Options

8.Install the left side panel (see “Replacing the Left Side Panel” earlier in this chapter).

9.Connect any peripherals and power cords, and power up the system.

Removing the Pentium II Processor

Remove the Pentium II processor cartridge from its Slot 1 socket and universal retention mechanism on the system board as follows.

!CAUTION

Before handling components, reduce static discharge by touching the chassis.

1.Remove the left side cover (see “Removing the Left Side Cover” earlier in this chapter).

2.Position the system on its right side for easier access to the system board and processor cartridge.

!WARNING

If the system was just running, the processor cartridge and heat sink on the system board are hot. To avoid a burn, let the components cool for about 10 minutes before continuing.

3.Locate the processor on the system board (see the figure “System board sockets and connectors” earlier in this chapter).

4-24 Installing Options