NEC VT 300 Series manual Installing the Celeron or Pentium III processor, A – Processor Cartridge

Installing the Celeron or Pentium III processor

A – Processor Cartridge	C – Slot 1 Connector
B – Retention Mechanism	D – Key

4.If the processor cartridge has an attached cooling fan, plug the fan cable into its connector (CPUFAN) on the system board.

5.Set the processor jumpers on the system board for the processor type that you installed (see “Processor Jumper Settings” in Chapter 3).

6.Replace the AGP graphics board and any expansion boards you might have removed (see “Installing an Expansion Board” and “Installing the AGP Board” later in this chapter).

7.Set the processor jumpers on the system board for the processor type that you installed (see “Processor Jumper Settings” in Chapter 3).

Installing Options 4-23