Removing the Right Side Cover

Before installing (or removing) 5 1/4-inch devices in your system, you must remove the right side cover from the system unit to access the device mounting screws.

!WARNING

Before removing the right side cover, turn off system power and unplug the system power cable. Power is removed only when the power cable is unplugged.

1.Turn off and unplug the system unit.

2.Disconnect any external options (such as a keyboard and monitor) from the front or rear of the system unit.

!CAUTION

Electrostatic discharge can damage computer components. Discharge static electricity by touching a metal object before removing the left side cover.

3.Remove the left side cover (see “Removing the Left Side Cover” earlier in this chapter).

Installing Options 4-9

Page 89 Page 91
Page 90
Image 90
NEC VT 300 Series manual Removing the Right Side Cover
Page 89 Page 91
Top Page Image Contents