8.Repeat steps 6 and 7 for the locking lever on the opposite end of the cartridge.
9.Pull the cartridge straight up and out of the socket and universal retention mechanism. Store the processor cartridge in an antistatic bag.
10.Install the upgrade processor (see “Installing the Celeron or Pentium III Upgrade Processor” in the next section).
Installing a Celeron or Pentium III Upgrade Processor
Install the Celeron or Pentium III upgrade processor cartridge as follows.
1.Remove the processor currently in your system (see “Removing the Celeron or Pentium III Processor” in the previous section).
!CAUTION
Before picking up the processor, reduce static discharge by touching the metal chassis.
2.Align the cartridge with the top of the retention mechanism so that the notch in the cartridge connector aligns with the key in the Slot 1 connector.
3.Insert the cartridge into the retention mechanism and evenly press down on the cartridge until it is fully seated in the Slot 1 connector.
