NEC VT 300 Series manual 44/1.25 MB 3 1/2

	Main Menu Items
Menu Item	Settings (default is bold)
System Time	Set system time in this field. Press Tab or
	Enter to move between hour, minute, and
	second fields.
	Example: 09:30:00
Floppy Drive A:	Disabled
	360 KB 5 1/4"
	1.2 MB 5 1/4"
	720 KB 3 1/2"
	1.44/1.25 MB 3 1/2"
	2.88 MB 3 1/2"
Floppy Drive B	Not Installed
Primary IDE Master	Device type, Auto
Primary IDE Slave	Device type, Auto
Secondary IDE Master	Device type, Auto
Secondary IDE Slave	Device type, Auto
	Each device menu item displays the Hard
	drive or CD-ROM identifier if a device is
	installed.
	If you install a hard drive that does not feature
	auto IDE type detection or your IDE hard
	drive was formatted on another system with
	parameters different from those reported by
	the drive, enter a parameter for each of the
	fields in the device submenu.
	Bring up a device submenu by pressing
	Enter. The submenus include Type,
	Cylinders, Heads, Sectors, LBA Mode, Block
	Mode, Fast Programmed I/O Modes, and
	32-Bit Transfer Mode. Each mode is briefly
	described in the following.

Configuring the System 3-9