How to Start BIOS Setup
To start the BIOS Setup utility, follow these steps.
1.Turn on or reboot the system.
2.Press F2 as soon as you see the following message at the bottom of the NEC startup screen.
Press F2 to enter BIOS Setup
You have about five seconds to press F2 before the system boot continues.
3.Setup’s Main Menu appears and looks similar to the following.
Setup Main Menu
Main Menu
Main Advanced Security Exit
BIOS Version | VI.xxxx |
Processor Type | Pentium |
Processor Speed | 450 MHz |
Cache RAM | 512 KB |
Total Memory | 32 Mb |
DRAM Bank 0 | SDRAM |
DRAM Bank 1 | None |
System Date | Wed Aug 11 1999 |
System Time | 10:17:59 |
Floppy Drive A | 1.44 MB 3 1/2 |
Floppy Drive B | Not Installed |
Primary IDE Master | Auto |
Primary IDE Slave | Auto |
Secondary IDE Master | Auto |
Secondary IDE Slave | Auto |
Setup Help
Month:
Day:
Year:
Previous Item
Next Item
Select Menu
Esc: Exit | Enter: Select | F5: Setup Defaults | F6: Original Values | F10: Save & Exit |
