
Advanced Menu - Power Management Setup
Menu Item | Settings (default is bold) |
Power Management/APM | Enabled, Disabled |
| The Enabled setting enables Power |
| Management and Advanced Power |
| Management (APM). |
Video Power Down Mode | Disabled, Standby, Suspend |
| Specifies the power conserving state that the |
| VESA VGA video subsystem enters after a |
| specified period of display inactivity has |
| expired. |
Hard Disk Power Down Mode | Disabled, Standby, Suspend |
| Specifies the power conserving state that the |
| hard disk drive enters after a specified period |
| of inactivity has expired. |
Standby Time Out (Minutes) | Disabled, 1, 2, 4, 8, 10, 20, 30, 40, 50, 60 |
| Specifies the length of time of system |
| inactivity while in full power on state before |
| entering Standby state. |
Suspend Time Out (Minutes) | Disabled, 1, 2, 4, 8, 10, 20, 30, 40, 50, 60 |
| Specifies the length of time of system |
| inactivity while in Standby state before |
| entering Suspend power state. |
Power Button Function | Sleep/Suspend |
| Sleep/Suspend sets the power switch for |
| Suspend (Sleep) mode. With power on, |
| pressing the switch once places the system in |
| sleep mode. Pressing and holding the switch |
| in for 4 seconds turns power off. |
|
|