4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 5-35
Setting up the Video

To Set Up the Video

Proceed as follows to set up the video information:
1. From the user interface of the D9865, click Audio & Video > Video Setup. The
Video Setup page is displayed.
2. Select HD output video format from the HDMI/Component Format drop-down
list (HD 1080i or HD720p). Select Auto for the receiver to automatically detect
the correct HD video format.
3. Set the Composite Format. Select PAL-B/G, PAL-D, or PAL-I for 625-line
systems. Select PAL-M for 525-line format for Brazil. Select PAL-N (AR) for 625-
line format for Argentina. Select NTSC or NTSC-J for 525-line systems. Select
Auto for the receiver to automatically detect the correct SD video format.
4. Select the Composite Aspect Ratio of the intended TV system (4:3 or 16:9).
5. The Aspect Ratio Mode is the conversion that the receiver will perform on the
incoming signal for the picture to be displayed correctly (i.e., to correspond to
the aspect ratio of your TV) on your TV, based on your selection.
The options are None, Auto, Auto AFD, 16:9 L/B, 4:3 P/B, 14:9, 4:3 CCO, and
16:9 SCALE. The default is None.
Note: For the actual conversion performed, refer to Actual Conversion Table,
on page 4-35.