5-30 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C
9. If you know the PID number, ensure that PID is selected under Mode and enter
the appropriate PID number. Click Apply.
10. To enter the stream type, select Stream under Mode, select the stream type in
the Stream Category (Vid, Aud, Subt, or TTX) and enter the instance of the
stream type in Stream Instance. You can enter a range from 1 to 64. Click Apply.
11. If you do not know the stream type, you can specify a specific hex value as the
stream type. Select Stream under Mode, select User under Stream Category,
enter the hex value of the stream under Stream Type value (hex) and the
instance of the customized stream type in Stream Instance. You can enter a two
digit hexadecimal value for the Stream Type and a range from 1 to 64 for the
Stream Instance. Click Apply.
12. To delete a record, identify the record you want to remove and click Delete.
13. Scroll down to view the CI Status information:
The following table describes the CI Status:
Stream Type Set Mode to Stream, select Stream Category (audio,
video, subtitle, ttx, or user) and enter Stream Instance of
the stream type.
There is an additional configuration if you select user as
the Stream Category (see below).
Stream Type: User Set Mode to Stream, Stream Category to User, manually
enter the stream code in Stream Type Value, and then
the Stream Instance of the stream type.
CI Status Description
Sys Name System name of the CAM.
Comp Name The company name of the CAM.
Manufacture Code The manufacturer’s code.
Manufacture ID The factory loaded application number of the CAM.
Serial Number The unique serial number of the CAM.
If you set by Parameter Settings