Safety Precautions, Continued

Important: Each ground connection must be made using a single (continuous) piece of wire. Never splice two wires together when making a ground connection. Corrosion and weathering can cause a poor electrical connection at the splice which can lead to an ineffective and dangerous ground condition.

Figure 1. Outdoor antenna grounding

Important: Install this product on a flat surface only, ensuring that all four rubber feet are making full contact with the mounting surface. During normal operation, it is recommended that physical contact be limited to using the front panel buttons only. Do not place any other equipment directly on top of the receiver, and prevent foreign objects from coming into direct contact with the chassis. Subjecting this product to abnormal impact may result in momentary interruption of video service.

viii

D9865 Satellite Receiver Installation and Operation Guide

4035197 Rev C

Page 8
Image 8
Cisco Systems 4028650000000 installation and operation guide Outdoor antenna grounding