Cisco Systems 4028650000000 Front Panel LEDs, CI Slot, Mute, Signal

About the Front Panel, Continued

To change a setting on a menu using the front panel:

1.Use the  buttons to move to the setting you want to change. Press the Select button to select the setting.

2.For numeric options, you can:

•use the  buttons to change the value one digit at a time, or

•navigate to Keyboard using the  buttons to use an on-screen keyboard.

3.To access the menus at the bottom of the screen (for example, Save), navigate to the appropriate selection using the  buttons and press Select. A help message is displayed at the bottom of the screen.

4.Press Menu to move to the previous menu.

Front Panel LEDs

The functions of the LEDs are described in the table below.

LED	Function
MUTE	• On when sound is muted.
SIGNAL	• On when receiver is synchronized with the incoming
	digital signal and authorized for the current channel.
	• Flashing when a signal has been found, but receiver is
	not authorized for the current channel.
	• Off when no signal has been found. For more
	information about troubleshooting your satellite
	receiver, see Troubleshooting, on page 7-19.
MENU	• On when on-screen menus are displayed.

CI Slot

The CI Slot allows the use of CAM (Conditional Access Module) Smart Card to decrypt purchased programming. For setup information, see Viewing DVB-CI Information, on page 4-77and Configuring the Common Interface (CI)

Information, on page 5-28.For a list of supported CAMs, refer to Common Interface Modules, on page 3-5.

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 3-3