Cisco Systems 4028650000000 installation and operation guide Parameter Description, Ldpc ER

Setting Up Dish Pointing, Continued

4.The Dish Status section displays the current satellite dish information. The following table describes the satellite dish information displayed:

	Parameter	Description
	C/N Margin	Indicates the current Carrier-to-Noise Margin for
		the received signal. The Carrier-to-Noise margin is
		the actual distance that C/N is from the noise
		threshold.
	Signal Level	Displays the relative strength of the received RF
		input signal. It is displayed in the range from 0 to
		100.
	RF Lock	Indicates whether the receiver is synchronized with
		the received RF signal.
	AFC	Indicates the current Automatic Frequency Control
		adjustment, in MHz.
	LDPC ER	Indicates the bit rate of the input stream of the
		LDPC error correction stage (DVB-S2 only).
	Packet ER	Indicates the current Packet Error Rate.
	PV BER	Indicates the PV (Post-Viterbi) BER for the received
		signal (DVB-S).
	RF(1) Power	Displays the LNB Power setting. The LNB Power
		setting determines if power is provided via the RF1
		Input to an external LNB connection.
	LNB Status	Indicates the current LNB connection status (No
		Load, Overloaded, OverTemp, Short Circuit,
		Disabled, Normal, or N/A).
5. Click Apply.

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 5-13