Cisco Systems 4028650000000 About using the on-screen menus, On-Screen Buttons

Main Menu, Continued

About using the on-screen menus

All screens or menus are accessed from the Main Menu. While viewing any channel, you can display on-screen menus for viewing or changing the current receiver setup. While in menus, you can change the current receiver settings, and/ or display other menus. Some menus contain status information, which is available for viewing only and cannot be changed.

To change a setting on a menu using the remote control:

1.Use the  buttons to move to the setting you want to change.

2.Press the OK button to select the setting.

3.For numeric options, you can use one of the following methods:

•enter the number directly using the numeric keypad on the remote control,

•use the  buttons to change the value one digit at a time, or

•press the red button (keyboard) to use an on-screen keyboard.

4.Press OK to save the setting and exit the menu. A help message is displayed at the bottom of the screen.

5.Press MENU to move to the previous menu.

Note: The steps in this chapter are based on using the remote control. For more information on changing a setting on a menu using the front panel controls, see About the Front Panel, on page 3-2.

The On-Screen Buttons

The on-screen menus have the following common buttons:

Button	Description
Save	Saves and applies the settings to the
	receiver.
Exit	Exits edit mode and menu. A message
	prompts you to save or discard changes
	before you exit the menu.

About the Current Channel

When you navigate to menus from a video channel, the information displayed is associated with the current (video) channel. If no changes have been made to the current setup, you are automatically returned to the same video channel when you exit to video.

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 4-5