BUSH HOG® UTILITY VEHICLE WORKSHOP MANUAL – SECTION 7: STEERING SYSTEM
9.Remove three capscrews and hex nuts securing the rack and pinion assembly (Figure 6) to the frame support.
10.Remove two capscrews and lock nuts securing the right side rack bracket (Figure 6) to the machine frame.
11. Disconnect the shifting cable from the shifting arm (Figure 7).
12.Loosen the shifting cable housing lock nuts just enough to remove the housing from the bracket (Figure 8).
13.Carefully remove the rack and pinion from machine.
14.Place the rack and pinion assembly on a work bench.
BRACKET & CAPSCREWS
CAPSCREWS
Figure 6
Rack and Pinion Assembly
SHIFTING ARM
SHIFTING CABLE
Figure 7
Shifting Cable Linkage
SHIFTING CABLE
SHIFTING CABLE HOUSING
Figure 8
