BUSH HOG® UTILITY VEHICLE WORKSHOP MANUAL – SECTION 7: STEERING SYSTEM

REPAIR

INSPECTION

See the operator’s manual for recommendations on inspecting the steering system.

Complaints of steering wheel hard to turn, hard steering, or loose steering can be a result of a bad pinion gear, bad rack, or bad tie rod ends.

Use the recommendations in the operator’s manual for initial testing. Inspect the rack and pinion and tie rods for worn, loose, or damaged parts.

Check for excessive wear in the steering bracket and upper steering shaft. Inspect the upper and lower steering shaft U-joints for excessive wear and damage. Replace the steering bracket bushings, steering bracket, upper and lower steering shafts as needed.

REMOVAL

CAUTION

When working underneath a raised vehicle, always support the vehicle with jack stands to prevent the vehicle from falling. A falling vehicle can cause severe personal injury or death.

RACK AND PINION REMOVAL

1.Using a floor jack, lift the machine and support with jack stands.

2.Turn the steering tires all the way right.

3.Remove the cotter pin from both tie rod end slotted hex nuts. Discard cotter pins.

4.Remove both tie rod slotted hex nuts (Figure 2).

TIE ROD END

SLOTTED HEX NUT

Figure 2

Tie Rod End

7-5

Page 4 Page 6
Page 5
Image 5
Bush Hog Utility Vehicle Workshop specifications Repair, Inspection, Rack and Pinion Removal, Tie Rod End
Page 4 Page 6

Utility Vehicle Workshop specifications

The Bush Hog Utility Vehicle Workshop is a state-of-the-art facility dedicated to the design, development, and production of high-performance utility vehicles that cater to various industries, including agriculture, landscaping, and recreation. With a commitment to quality and innovation, this workshop focuses on integrating advanced technologies and features that enhance the utility, comfort, and efficiency of each vehicle.

At the heart of the Bush Hog Utility Vehicle Workshop is a philosophy centered on durability and reliability. The workshop utilizes high-grade materials and rigorous testing procedures to ensure that every vehicle can withstand harsh conditions and demanding tasks. From heavy-duty frames to all-terrain tires, the workshop emphasizes robustness in every aspect of its vehicles.

One of the standout features of the utility vehicles produced here is the powerful engine options available. The workshop offers a range of engine sizes, from efficient, fuel-sipping models for light tasks to robust, high-torque engines designed for heavy-duty applications. This versatility allows users to select the ideal powertrain to suit their specific needs.

Technological advancements are also a focal point at the Bush Hog Utility Vehicle Workshop. Many models are equipped with advanced electronic control units that optimize performance based on load and terrain conditions. These smart features help in enhancing fuel efficiency and improving overall vehicle handling. Additionally, some vehicles come with integrated GPS systems for navigation and route planning, making them perfect companions for expansive agricultural lands or large properties.

Comfort and convenience are not overlooked in the design of these utility vehicles. The workshop incorporates ergonomic seating, ample storage space, and user-friendly dashboards. Many models also feature adjustable suspensions to provide a smoother ride over uneven terrain, making long work days more bearable for operators.

Safety is paramount at the Bush Hog Utility Vehicle Workshop. Each vehicle comes with safety features such as roll-over protective structures (ROPS), seat belts, and advanced braking systems that ensure the vehicle operates safely under various conditions.

Overall, the Bush Hog Utility Vehicle Workshop stands out for its unwavering commitment to quality, innovation, and user satisfaction. By combining robust construction, advanced technologies, and user-centric design, the workshop continues to produce utility vehicles that meet the evolving demands of professionals across diverse fields.
Top Page Image Contents