Bush Hog Utility Vehicle Workshop specifications Tools, Safety First

BUSH HOG® UTILITY VEHICLE WORKSHOP MANUAL – SECTION 7: STEERING SYSTEM

TOOLS

Common hand and shop tools can be used to remove and install steering system components serviced in the section. All special tools are listed below.

Ball Joint Removal Tool (1.0-1.5” (25.4-38.1mm): Needed for removal of tie rod ends from the strut casting steering arm. Ball joint removal tools are commercially available in various sizes.

SAFETY FIRST

CAUTION

Never work underneath a raised vehicle without adequate support. Use jack stands to prevent the vehicle from falling. A falling vehicle can cause severe personal injury or death.

CAUTION

When lifting a vehicle chock the wheels left on the ground to prevent the vehicle from rolling or sliding backward.

7-3