Setting the Unicast IP Address

Viewing the Unicast IP

Unicast transmission is used to send messages to a specific address. You can specify up to six single network destinations. The Gateway address is necessary if the network address is not on a local network.

Proceed as follows to view the Unicast IP addresses:

1. From the Network Setup screen, select Unicast IP Setup and click OK.

The Unicast IP Setup screen lists all the IP addresses and its Gateway addresses that are participating in a Network environment.

Adding a Unicast IP Address

Proceed as follows to add a Unicast IP Address:

1.From the Unicast IP Setup screen, press the green button (Add) to add a new address.

4-56

D9865 Satellite Receiver Installation and Operation Guide

4035197 Rev C

Page 90
Image 90
Cisco Systems 4028650000000 Setting the Unicast IP Address, Viewing the Unicast IP, Adding a Unicast IP Address