Configuring Tuning Setup, Continued

12.The Current Input Status section displays the current RF status. The following table describes the Current Input Status information displayed:

 

RF Status

Description

 

 

 

 

Downlink Frequency

Indicates the current downlink frequency, in GHz.

 

 

 

 

L Band Frequency

Indicates the current L-Band frequency, in MHz.

 

(MHz)

 

 

 

 

 

Symbol Rate (Msym)

Indicates the Symbol Rate of the received signal, in

 

 

MS/s.

 

 

 

 

FEC

Indicates the FEC (Forward Error Correction) rate of

 

 

the received signal.

 

 

 

 

Modulation Type

Indicates the modulation type for the received

 

 

signal.

 

 

 

 

Pilots

Indicates whether the pilots for the DVB-S2

 

 

modulation is on or off.

 

 

 

 

I/Q

Indicates the input signal spectrum inversion

 

 

setting.

 

 

 

 

Signal Status

Indicates the current signal lock status for the input.

 

 

Locked - Receiver is locked to a carrier with no valid

 

 

content.

 

 

Lock+Sig - Receiver is locked to a carrier with valid

 

 

content.

 

 

No Lock - Receiver is not locked to a carrier.

 

 

 

 

TS ID

Displays the Transport Stream ID.

 

 

 

 

LNB Presets

Indicates the number of LNB presets configured.

 

 

 

 

Acquisition State

Displays Full if the ASI and PSI tables have all been

 

 

found. Otherwise, it will display Degraded if there

 

 

are missing tables or None if no ASI or PSI tables

 

 

have been found.

 

 

 

13. Click Apply.

 

4035197 Rev C

D9865 Satellite Receiver Installation and Operation Guide

5-11

Page 131
Image 131
Cisco Systems 4028650000000 installation and operation guide RF Status Description, Ts Id