Setting Up the Satellite Dish, Continued

Signal Lock

The Signal Lock status is continuously updated to indicate whether the receiver is synchronized with the received satellite RF signal. Signal Lock status is displayed on the Preset / LNB Setup and Dish Setup menus.

If the receiver is able to synchronize to a carrier frequency and an MPEG stream is present, Signal Lock displays Lock and the Signal LED on the receiver front panel is on. If no carrier is detected, Signal Lock displays No Lock and the Signal LED is off.

4-32

D9865 Satellite Receiver Installation and Operation Guide

4035197 Rev C

Page 66
Image 66
Cisco Systems 4028650000000 installation and operation guide Signal Lock