Cisco Systems 4028650000000 installation and operation guide Setting Up Import/Export Information

Setting Up Import/Export Information, Continued

The Configure Offline FTP Settings File Transfer section has backup and restore controls.

6.Type the Settings Filename of the backup/restore file. You can enter up to 31 characters.

7.Set the FTP Server IP Address of the FTP server used to restore the backup/ restore file. The address is up to 12 characters in length (e.g. 171.300.100.200) and in the range from 0 to 255.

8.Set the FTP User Name and FTP Password to access the FTP server.

Note: The FTP Password is not retained in the receiver. You must re-enter the password before initiating the backup or restore operation.

9.Set the FTP Port Number of the FTP server used to store the backup/restore file. You can enter a port number in the range from 1 to 65535.

10.Select Export Device Settings & Transport Network Information or Export User Device Settings Only.

11.Click Export to save the settings to a backup file. Click Import to retrieve the last backed up file.

5-60 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C