Setting Up IP Routing, Continued

4.The Static Unicast Routing displays the static unicast routing addresses for the MPE data. To add a new address, click Add. The following is displayed:

Set the Destination IP Address for its participation in a Network environment. The address must be 12 digits in length, in the following format:

###.###.###.###.

Set the subnet Mask for its participation in a Network environment, from 8 to 32.

Set the network Gateway Address used to expose the receiver to a WAN. The address must be 12 digits in length, in the following format:

###.###.###.###.

Click Add.

To remove an address entry, select the entry and click Delete.

5.The Multicast Filtering Addresses section lists the multicast destination IP addresses. To add a new address, click Add. The following is displayed:

Enter a Multicast Filter Address and click Add.

To remove an address entry, select the entry and click Delete.

4035197 Rev C

D9865 Satellite Receiver Installation and Operation Guide

5-47

Page 167
Image 167
Cisco Systems 4028650000000 installation and operation guide Enter a Multicast Filter Address and click Add