Cisco Systems 4028650000000 manual

DVB-S2 Error Rate Performance ES/No (C/N) Ratio

DVB-S2 Error Rate Performance Es/No (C/N) Ratio

Mode	Simulated Es/No (dB) for FEC	Typical Performance (dB) in
	Frame length = 64,800	Linear Channel and IF Loop
		Configuration

QPSK 1/2	1.00	1.2

QPSK 3/5	2.23	2.4

QPSK 2/3	3.10	3.2

QPSK 3/4	4.03	4.2

QPSK 4/5	4.68	4.8

QPSK 5/6	5.18	5.3

QPSK 8/9	6.20	6.4

QPSK 9/10	6.42	6.6

8PSK 3/5	5.50	5.8

8PSK 2/3	6.62	6.8

8PSK 3/4	7.91	8.1

8PSK 5/6	9.35	9.6

8PSK 8/9	10.69	10.9

8PSK 9/10	10.98	11.3

Note: “Typical performance” was measured with Pilots On. Pilots On is highly recommended as the performance values typically degrade up to 0.9 dB with Pilots Off. Pilots On must be used for 8PSK 3/5, 8PSK 2/3 and 8PSK 3/4.

4035197 Rev C

D9865 Satellite Receiver Installation and Operation Guide

A-5

Image 225

Cisco Systems 4028650000000 DVB-S2 Error Rate Performance ES/No C/N Ratio, DVB-S2 Error Rate Performance Es/No C/N Ratio

Contents

Cisco D9865 Satellite Receiver Importante Zu beachten Publication Disclaimer Trademark AcknowledgementsCopyright LicensesPage Safety Precautions Rev C Satellite Receiver & Satellite Antenna Grounding Outdoor antenna grounding Safety Precautions EU Market WarnungAdvertencia Précautions à prendre Precaucion Vorsicht AC Mains Lead Connection Important Contents Setup and Monitoring via Web GUI Appendix a Technical Specifications Service and MaintenanceAppendix B Default Settings Chapter Customer Information Appendix D Compliance Check your installation About the Video StandardSatellite Receiver Startup Receivers with Factory Pre-configured Presets Quick Setup Instructions Quick Setup Instructions D9865B Satellite Receiver D9865H Satellite Receiver Rear Panels Connections D9865D Satellite Receiver D9865 Satellite Receiver Installation and Operation Guide This Chapter OverviewTopic See D9865 Satellite Receiver Optional Features Key Features D9865 Satellite Receiver Installation and Operation Guide Chapter Front Panel Operation Button Function About the Front PanelDisplay Menu Front Panel LEDs SignalCI Slot Mute Keyboard Display Setting the TV Video Format Common Interface Modules Part Number Common Interface Modules Remote Control Button Function Remote Control FunctionsFAV Last EPG VOL+, VOLExit D9865 Satellite Receiver Installation and Operation Guide Topic See Chapter Setup and Monitoring via On-Screen Display Topic See Main Menu Main Menu On-Screen Buttons About using the on-screen menusAbout the Current Channel Button Description Options Description Channel List without EPG Features of the EPG What is EPG?Introduction to the EPG Browsing By Channel Browsing by a Different Date Parts of the GuideViewing Favorites Favorite Channels, on Changing Channels Viewing Timers Setting a Reminder Timer From EPG Setting TimersChannel/Timer Description Channel Number Channel/Timer Description Information Deleting a Timer Profile Editing a Timer Profile Adding a Favorite Profile Setting Up Your Favorite Channels Deleting a Favorite Profile Editing a Favorite Profile Performing a Channel Scan To Set Up One Button Channel Change Setting Up One Button Channel Change Setup Menu To Set Up Tuning/Preset Parameters Setting up Tuning / PresetSelection Options Description Default DVB-S Settings, on LNB PowerLNB NIT Indicates the quality of the received signal Setting up the Preset / LNB To Set Up Preset/LNB ParametersSelection Options Description Editing Network Presets Selecting the Active Preset Setting up LNB To Set Up LNB ParametersPower Settings , on Number LO Freq Crossover Enter LNB Power Setting NIT Contains Output LNB Voltage LNB Power Settings To Set Up the Dish Setting Up the Satellite Dish Setting Up the Satellite Dish None No action is performed Ldpc BER Parameter DescriptionPV BER PER Changing the Satellite Position in User Mode Adjusting the Satellite Position in Installer ModeParameter Description Signal Lock Received RF signal Adjusting the Satellite position using Signal Tones Signal Level and Signal QualitySignal Lock/Quality Tone Signal Lock Setting up the Video Setting up the Video PAL-I PAL-M PAL-B/G, PALPAL-N AR NTSC, NTSC-J Actual Conversion Table Stream Aspect Actual Description ImageConversion Stream Aspect Actual Description Image 169 169 L/B None Conversion is not possible Source User Component Cvbs & TV-Out Video Output Restrictions 720p 30Hz Auto or Setting up Subtitles Setting up SubtitlesDVB Semi Applies a semi-transparent box to subtitle Text None Setting up Audio Setting up the AudioTable in Digital Audio Preference Digital Audio Preference Settings Input Digital Audio Preference OutputDolby Digital Compressed To View the Advanced Setup Menu Advanced Setup Setting up Advanced User Settings To Set Up the Advanced User SettingsSee Changing the Lock Level, on YYYY/MM/DD Changing the Lock Level PasswordYYYY/MM DD/MM/YYYY Changing the Lock Level Changing the Lock Level Password Changing the Lock Level PasswordSelect Set Lock Level Password and press OK Performing a Factory Reset Rebooting the ReceiverResetting the Web GUI Login Information To Set Up the POV Mode Setting up POV Mode Allowed Service Lists Auto Basic Custom To View the Network Setup Menu Network Setup Configuring IP Setup Setting up the IP InformationMPE Output MPE Bit Rate Mbps SD Mbps HD Setting the Filter Mode Mask Subnet Mask 255.0.0.0 Editing an IP Address Setting the Unicast IP Address Viewing the Unicast IPAdding a Unicast IP Address Editing a Unicast IP Address Deleting a Unicast IP AddressMask Subnet Mask Setting the Multicast IP Address Viewing the Multicast IP AddressesAdding a Multicast IP Address Deleting a Multicast IP Address Editing a Multicast IP Address Configuring Snmp Setup Setting up Snmp Viewing Trap Destinations Setting up Trap Destinations Editing/Deleting Trap Destinations Adding Trap Destinations Setting the Noise Cutoff parameters Configuring Noise Cutoffs DVB-S/DVB-S2 TS DVB-S/DVB-S2 Audio Default C/N Margin Relationship To Set Up Alarms and Warnings Setting up Alarms and WarningsTo configure the Alarm settings Alarm Setting Description To configure the Warning settings DL Mode Description Viewing DownloadsPerforming Over-the-Air Downloads Setting Bootable Application Selection To View Application Version numbersTo Change the Download Application System Information To View the System InformationDVB-CI Viewing the Version Information To View the Version InformationVersion Information Description Viewing Hardware Information To View the Hardware InformationHardware Information Description To view the Installed Options Viewing Installed Options Viewing Service Information To View the Service InformationAbout Subscriber Services Viewing Channel Information To View the Channel InformationChannel Information Description Viewing DVB-CI Information To View the Current DVB-CI InformationDVB-CI Information Description DVB-CI Information Description Viewing Device Status Information To View the Device Status InformationDevice Status Description Information Viewing the Active Alarm and Warning Messages To View the Active Alarm MessagesActive Alarm Description Active Warning Description To View the Active Warning Messages To View the RF Status Information Viewing the RF StatusRF Status Description FEC Indicates the PV Post-Viterbi BER of the received Viewing Advanced RF Diagnostics To View the ADP Status Viewing ADP StatusADP Status Description ISE UA ADP Status Description Chapter Setup and Monitoring via Web GUI Topic See Type the Username and Password Logging on to the Web GUITo Log on to the Web GUI Web GUI Summary Screen To get an Overview of the Main D9865 Settings Module Description Linked Pages Links D9865 Web GUI Environment Web GUI EnvironmentWindow Buttons About Window To Set up Tuning Information Tuning Setup Configuring Tuning Setup TS ID To Set Up Dish Pointing Setting Up Dish Pointing Ldpc ER Options Description Goto Satellite Moves the dish to the selected pre-stored To Set up the SI Receive Parameters Setting up SI Receive Parameters Allowed Service Lists Custom To Set Up the Muting Threshold Controls Setting up Muting Threshold Controls Setting up Muting Threshold Controls Audio Default C/N Margin Relationship To Set Up the Tuning Presets Setting up the Tuning Presets/LNB Setting up the Tuning Presets/LNB To Set Up the LNB Presets Setting up LNB Presets Click Apply to Preset Setting up Dish Presets To View the Input Status Viewing Input Status To set the Channel Selection Setting the Channel Information Channel Information Description To Configure the Common Interface CI Configuring the Common Interface CI Information Set Mode to PID and enter PID number If you set by Parameter Settings CI Status Description System ID Description To View the PSI Tables Viewing the PSI TablesAbbreviation Description PID To View the PSI Frequency Information Viewing PSI Frequency Information To View the PSI Channels Viewing the PSI ChannelsPMT PID ECM PID To Set Up the Video WSS Mode Description To Set Up the Caption Parameters Configuring Captions Op Mode Selection Description To Set Up Subtitles Select Language By Option Description BackGnd Option Description D9865 Satellite Receiver Installation and Operation Guide To Set Up the Audio Audio Status Description Viewing System Information To View the System Identification InformationIdentity Information Description To View the Features or License Information Viewing Features/Licenses Setting Up IP Information To Configure Management and Data Port SettingsSelection Description To Set Up IP Routing Setting Up IP Routing Enter a Multicast Filter Address and click Add To Set Up Snmp Setting Up Snmp and Trap Destinations Setting up Snmp and Trap Destinations To Configure the Time/Clock Settings Configuring Time/Clock Information To Configure Favorites and Reminders Configuring Favorites and Reminders To Edit a Favorites Profile To View the Active Alarm/Warning Status Information Viewing the Alarm/Warning Status To Set Up Alarms To Set up Warnings To View the Alarm/Warning History Information Viewing the Alarm/Warning History Viewing Version Information Viewing Hardware Information To Configure the Import/Export Information Setting Up Import/Export Information Setting Up Import/Export Information Viewing the Backup/Restore History To View the backup and restore Status InformationStatus Description Managing D9865 Web GUI Accounts To Configure the User Login Passwords Proceed as follows to manage user accounts To Add a User Account To delete a user account Account Type Access To Configure the Lock Level settings Configuring Lock Level Settings Enter the Current lock level Password To View Cisco Contact Information Viewing Contact Information To View the Diagnostic Log Messages Viewing Diagnostic Logs Viewing the Usage Counters To View the Device Usage CountersClear Device Status Description To Load a Software Version Performing Service Actions D9865 Satellite Receiver Installation and Operation Guide Chapter Customer Information Product Support Warranty and Post-Warranty SupportTraining Support Customers Location Phone Number Case of a Fault Customer ResponsibilityCase of Repair Obtaining an RMA Number and Shipping Address Returning Products Packing and Shipping the Product D9865 Satellite Receiver Installation and Operation Guide Chapter Service and Maintenance Messages Alarms Message Cause/Remedy Description Severity TypeGeneral D9865 Receiver Message List Alarm Message Cause/Remedy Description Severity Type Production DL APP Reboot NVS Flash Alarm Message Message Cause/Remedy Description Severity Type Alarm Message Message Cause/Remedy Description Alarm Message Cause/Remedy Description Severity Type Alarm Message Cause/Remedy Description Severity Type LNB PS Record Alarm Message Cause/Remedy Description Severity Type Alarm Message Cause/Remedy Description Severity Type Alarm Message Cause/Remedy Description Severity Type Alarm Message Cause/Remedy Description Severity Type Message Cause/Remedy Description Type Message Cause/Remedy Description Type Message Cause/Remedy Description Type PRI Hdcp Problem Cause Remedy Troubleshooting Instructions, Quick Setup Problem Cause Remedy D9865 Satellite Receiver Installation and Operation Guide This Appendix Appendix a Technical Specifications Receiver Specifications Parameter SpecificationTuner Symbol Rate Stability LNB RequirementsDVB-S and DVB-S2 DVB-S Eb/No C/N Ratio DVB-S Eb/No C/N RatioConvolutional FEC Rate Eb/No Ratio dB At DVB Threshold DVB-S2 Error Rate Performance ES/No C/N Ratio DVB-S2 Error Rate Performance Es/No C/N RatioMode Simulated Es/No dB for FEC Typical Performance dB Analog Video Output Video OutputDigital Audio/Video Output D9865H and D9865D only HD Analog Video Output D9865H and D9865D only Analog Audio Output Audio OutputsDigital Audio S/PDIF Output AAC AC Power Connector PowerGeneral Mechanics Appendix B Default Settings Factory Default Settings Tuning/PresetParameter Default Preset Number Downlink 12.15 GHz Symbol Rate 28.3465 MS/s NetId Downlink 12.31 GHz Symbol Rate 30.0 Ms/s NetId Downlink 12.45 GHz Symbol Rate 30.5 MS/s NetId Preset Number 9 to LNB Setup Configuration LNB Setup Configuration 1 to Subtitle Setup Video Setup Audio Setup AdministrationYYYY-MM-DD Advanced Administration POV ModeIP Setup Unicast IP Setup Trap Destination Setup Noise CutoffsDownload Alarms and Warnings CI Setup Web GUI onlyParameter Default AW Banner Disable Import/Export Web GUI only D9865 Satellite Receiver Installation and Operation Guide Appendix C Lock Levels Video D9865 Satellite Receiver Lock LevelsLevel Description Parameter Lock Level Channel List All Screens Parameter Lock Level Set Timer TimersEPG Grid EPG Info Edit Favorites Favorites Tuning/Preset Preset Tuning/PresetPresetLNBOne Button Channel Change button presses Dish Setup Installer Mode Dish Setup User Mode Subtitles BAT NIT SDT PAT Change IP Address Snmp Setup Alarms & Warnings Alarm SetupTrap Destinations Info Bootable App Selection Screen Applicable Notices and Disclaimer FCC NoticesIndustry Canada Notice Disclaimer Declaration of Conformity D9865 Satellite Receiver Installation and Operation Guide