Setting Up IP Information
To Configure Management and Data Port Settings
Proceed as follows to configure management and data port settings:
1.From the user interface of the D9865, click System Settings > System > IP Settings. The IP Settings page is displayed.
2. For the Management and Data Port Settings, set the following parameters:
Selection | Description |
|
|
IP Address | Sets the IP Address for its participation |
| in a Network environment. The IP |
| Address is 12 digits in length |
| (###.###.###.###). |
|
|
IP Mask | Sets Subnet Mask for its participation in |
| a Network environment. You can enter |
| a value in the range from 8 to 32. |
|
|
Gateway Address | Sets the Network Gateway Address on |
| the Network, used to expose the |
| receiver to a WAN. |
|
|
4035197 Rev C | D9865 Satellite Receiver Installation and Operation Guide |
