Logging on to the Web GUI

To Log on to the Web GUI

Proceed as follows to log on to the Web GUI:

1.Open MS Internet Explorer.

2.Type the IP address of the D9865 Satellite Receiver in the address bar and press Enter.

3.Type the Username and Password.

Note: The username and password are case-sensitive. The default username is admin and the default password is localadmin. If you have forgotten your username and password, you can reset them to its factory defaults from the on- screen menu of the D9865 Satellite Receiver. For more information, refer to System Information, on page 4-71.

Important: The password and user name will be remembered for the whole web session. Close the web browser if you want to prevent others from accessing the settings of the D9865 Satellite Receiver.

If your session expires, you must refresh the browser and log back in.

4.Click Log In.

Note: If you select Remember username, the user name will be remembered the next time you log into the web GUI.

4035197 Rev C

D9865 Satellite Receiver Installation and Operation Guide

5-3

Page 123
Image 123
Cisco Systems 4028650000000 Logging on to the Web GUI, To Log on to the Web GUI, Type the Username and Password