4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 7-9
Flash Storage Set RECORD: init failed Cause: Hardware
issue.
Remedy: Clear
alarms, reset the unit,
and notify customer
service if the problem
persists.
Non-volatile
storage system
corrupted.
Possible loss of
configuration
Major
RECORD
MANAGER: Record
contents check error,
erasing all
NVS Corruption,
loss of
configuration
data
RECORD: sector
setup check error,
erasing sector
NVS Corruption,
loss of sector
data
Clear RECORD: init done
LNB PS Set LNBPS: No Load Cause: Hardware or
wiring issue.
Remedy: Clear
alarms, check LNB
and wiring, and
notify customer
service if the problem
persists.
LNB power
overload
Minor
LNBPS: Over
Temperature
LNBPS: Over Loaded
LNBPS: Short Circuit
Clear LNBPS: Normal LNB power OK
LNBPS: Disabled
LNBPS: Off
DiSEqC HW
Fault
Set DiSEqC Hardware
Fault
Cause: Hardware
issue.
Remedy: Clear
alarms, check LNB
and wiring, and
notify customer
service if the problem
persists.
Ensure LNB power is
on (even if using
external LNB power)
and DiSEqC is
enabled.
Unable to send
DiSEqC
commands to
external
equipment.
Minor
Clear Automatically
cleared after a
few seconds.
Alarm Message
Type
Message Cause/Remedy Description Severity