Cisco Systems 4028650000000 manual

Alarm	Message	Message	Cause/Remedy	Description	Severity
	Type

MPE alarm	Set	Data lost, transport	Cause: Transport	Transport error	Major
		error	error indicator is set	detected, MPE
			in the transport	data may be lost.
			stream.
			Remedy: Verify
			uplink is in good
			condition.

		Data lost, CRC error	Cause: CRC error	CRC error
			detected in MPE	detected in MPE
			stream.	stream, data is
			Remedy: Verify	lost.
			uplink is in good
			condition.

		Data lost, CC error	Cause: CC error	CC error
			detected in MPE	detected in MPE
			stream.	stream, data is
			Remedy: Verify	lost.
			uplink is in good
			condition.

		Data lost, buffer	Cause: Buffer	Buffer overflow
		overflow	overflow detected in	detected in MPE
			MPE stream.	stream, data is
			Remedy: Reduce	lost.
			MPE rate.

		Data lost, bad	Cause: Bad section	Bad sections
		sections	data detected in MPE	detected while
			stream, due to	processing MPE
			original data or	data, data is lost.
			overflow issue.
			Remedy: Verify
			uplink is in good
			condition and/or
			reduce MPE rate.

		Data lost, MPE	Cause: Bit rate	Decoder
		capacity exceeded	controller dropping	exceeded safe
			data due to CPU load	CPU load for
			limitations.	MPE processing,
			Remedy: Reduce	MPE data is lost.
			MPE rate.

7-12

D9865 Satellite Receiver Installation and Operation Guide

4035197 Rev C

Image 210

Cisco Systems 4028650000000 installation and operation guide Alarm Message Cause/Remedy Description Severity Type

Contents

Cisco D9865 Satellite Receiver Zu beachten Importante Copyright Trademark AcknowledgementsPublication Disclaimer LicensesPage Safety Precautions Rev C Satellite Receiver & Satellite Antenna Grounding Outdoor antenna grounding Safety Precautions EU Market WarnungAdvertencia Précautions à prendre Vorsicht Precaucion AC Mains Lead Connection Important Contents Setup and Monitoring via Web GUI Appendix B Default Settings Service and MaintenanceAppendix a Technical Specifications Chapter Customer Information Appendix D Compliance Check your installation About the Video StandardSatellite Receiver Startup Quick Setup Instructions Receivers with Factory Pre-configured Presets Quick Setup Instructions Rear Panels Connections D9865B Satellite Receiver D9865H Satellite Receiver D9865D Satellite Receiver D9865 Satellite Receiver Installation and Operation Guide Topic OverviewThis Chapter See D9865 Satellite Receiver Key Features Optional Features D9865 Satellite Receiver Installation and Operation Guide Chapter Front Panel Operation Display About the Front PanelButton Function Menu CI Slot SignalFront Panel LEDs Mute Setting the TV Video Format Keyboard Display Common Interface Modules Common Interface Modules Part Number FAV Remote Control FunctionsRemote Control Button Function Last EPG VOL+, VOLExit D9865 Satellite Receiver Installation and Operation Guide Chapter Setup and Monitoring via On-Screen Display Topic See Topic See Main Menu Main Menu About the Current Channel About using the on-screen menusOn-Screen Buttons Button Description Channel List without EPG Options Description Introduction to the EPG What is EPG?Features of the EPG Browsing By Channel Viewing Favorites Parts of the GuideBrowsing by a Different Date Favorite Channels, on Viewing Timers Changing Channels Channel/Timer Description Setting TimersSetting a Reminder Timer From EPG Channel Number Channel/Timer Description Information Editing a Timer Profile Deleting a Timer Profile Setting Up Your Favorite Channels Adding a Favorite Profile Editing a Favorite Profile Deleting a Favorite Profile Performing a Channel Scan Setting Up One Button Channel Change To Set Up One Button Channel Change Setup Menu Selection Options Description Default Setting up Tuning / PresetTo Set Up Tuning/Preset Parameters DVB-S LNB LNB PowerSettings, on NIT Indicates the quality of the received signal Setting up the Preset / LNB To Set Up Preset/LNB ParametersSelection Options Description Selecting the Active Preset Editing Network Presets Setting up LNB To Set Up LNB ParametersPower Settings , on Number LO Freq Crossover Enter LNB Power Settings LNB Power Setting NIT Contains Output LNB Voltage Setting Up the Satellite Dish To Set Up the Dish Setting Up the Satellite Dish None No action is performed PV BER Parameter DescriptionLdpc BER PER Parameter Description Signal Lock Adjusting the Satellite Position in Installer ModeChanging the Satellite Position in User Mode Received RF signal Adjusting the Satellite position using Signal Tones Signal Level and Signal QualitySignal Lock/Quality Tone Signal Lock Setting up the Video Setting up the Video PAL-N AR PAL-B/G, PALPAL-I PAL-M NTSC, NTSC-J Actual Conversion Table Stream Aspect Actual Description ImageConversion Stream Aspect Actual Description Image 169 169 L/B None Conversion is not possible Video Output Restrictions Source User Component Cvbs & TV-Out 720p 30Hz Auto or Setting up Subtitles Setting up SubtitlesDVB Semi Applies a semi-transparent box to subtitle Text None Setting up Audio Setting up the AudioTable in Digital Audio Preference Digital Audio Preference Settings Input Digital Audio Preference OutputDolby Digital Compressed Advanced Setup To View the Advanced Setup Menu Setting up Advanced User Settings To Set Up the Advanced User SettingsSee Changing the Lock Level, on YYYY/MM Changing the Lock Level PasswordYYYY/MM/DD DD/MM/YYYY Changing the Lock Level Changing the Lock Level Password Changing the Lock Level PasswordSelect Set Lock Level Password and press OK Performing a Factory Reset Rebooting the ReceiverResetting the Web GUI Login Information Setting up POV Mode To Set Up the POV Mode Allowed Service Lists Auto Basic Custom Network Setup To View the Network Setup Menu Configuring IP Setup Setting up the IP InformationMPE Output Setting the Filter Mode MPE Bit Rate Mbps SD Mbps HD Editing an IP Address Mask Subnet Mask 255.0.0.0 Setting the Unicast IP Address Viewing the Unicast IPAdding a Unicast IP Address Editing a Unicast IP Address Deleting a Unicast IP AddressMask Subnet Mask Setting the Multicast IP Address Viewing the Multicast IP AddressesAdding a Multicast IP Address Editing a Multicast IP Address Deleting a Multicast IP Address Setting up Snmp Configuring Snmp Setup Setting up Trap Destinations Viewing Trap Destinations Adding Trap Destinations Editing/Deleting Trap Destinations Configuring Noise Cutoffs Setting the Noise Cutoff parameters DVB-S/DVB-S2 TS DVB-S/DVB-S2 Audio Default C/N Margin Relationship To configure the Alarm settings Setting up Alarms and WarningsTo Set Up Alarms and Warnings Alarm Setting Description To configure the Warning settings DL Mode Description Viewing DownloadsPerforming Over-the-Air Downloads Setting Bootable Application Selection To View Application Version numbersTo Change the Download Application System Information To View the System InformationDVB-CI Viewing the Version Information To View the Version InformationVersion Information Description Viewing Hardware Information To View the Hardware InformationHardware Information Description Viewing Installed Options To view the Installed Options Viewing Service Information To View the Service InformationAbout Subscriber Services Viewing Channel Information To View the Channel InformationChannel Information Description Viewing DVB-CI Information To View the Current DVB-CI InformationDVB-CI Information Description DVB-CI Information Description Viewing Device Status Information To View the Device Status InformationDevice Status Description Information Viewing the Active Alarm and Warning Messages To View the Active Alarm MessagesActive Alarm Description To View the Active Warning Messages Active Warning Description RF Status Description Viewing the RF StatusTo View the RF Status Information FEC Indicates the PV Post-Viterbi BER of the received Viewing Advanced RF Diagnostics ADP Status Description Viewing ADP StatusTo View the ADP Status ISE UA ADP Status Description Chapter Setup and Monitoring via Web GUI Topic See Type the Username and Password Logging on to the Web GUITo Log on to the Web GUI To get an Overview of the Main D9865 Settings Web GUI Summary Screen Module Description Links Linked Pages D9865 Web GUI Environment Web GUI EnvironmentWindow Buttons About Window Tuning Setup To Set up Tuning Information Configuring Tuning Setup TS ID Setting Up Dish Pointing To Set Up Dish Pointing Ldpc ER Options Description Goto Satellite Moves the dish to the selected pre-stored Setting up SI Receive Parameters To Set up the SI Receive Parameters Allowed Service Lists Custom Setting up Muting Threshold Controls To Set Up the Muting Threshold Controls Setting up Muting Threshold Controls Audio Default C/N Margin Relationship Setting up the Tuning Presets/LNB To Set Up the Tuning Presets Setting up the Tuning Presets/LNB Setting up LNB Presets To Set Up the LNB Presets Setting up Dish Presets Click Apply to Preset Viewing Input Status To View the Input Status Setting the Channel Information To set the Channel Selection Channel Information Description Configuring the Common Interface CI Information To Configure the Common Interface CI If you set by Parameter Settings Set Mode to PID and enter PID number CI Status Description System ID Description Abbreviation Description Viewing the PSI TablesTo View the PSI Tables PID Viewing PSI Frequency Information To View the PSI Frequency Information PMT PID Viewing the PSI ChannelsTo View the PSI Channels ECM PID To Set Up the Video WSS Mode Description Configuring Captions To Set Up the Caption Parameters To Set Up Subtitles Op Mode Selection Description BackGnd Option Description Select Language By Option Description D9865 Satellite Receiver Installation and Operation Guide To Set Up the Audio Audio Status Description Viewing System Information To View the System Identification InformationIdentity Information Description Viewing Features/Licenses To View the Features or License Information Setting Up IP Information To Configure Management and Data Port SettingsSelection Description Setting Up IP Routing To Set Up IP Routing Enter a Multicast Filter Address and click Add Setting Up Snmp and Trap Destinations To Set Up Snmp Setting up Snmp and Trap Destinations Configuring Time/Clock Information To Configure the Time/Clock Settings Configuring Favorites and Reminders To Configure Favorites and Reminders To Edit a Favorites Profile Viewing the Alarm/Warning Status To View the Active Alarm/Warning Status Information To Set Up Alarms To Set up Warnings Viewing the Alarm/Warning History To View the Alarm/Warning History Information Viewing Version Information Viewing Hardware Information Setting Up Import/Export Information To Configure the Import/Export Information Setting Up Import/Export Information Viewing the Backup/Restore History To View the backup and restore Status InformationStatus Description To Configure the User Login Passwords Managing D9865 Web GUI Accounts To Add a User Account Proceed as follows to manage user accounts Account Type Access To delete a user account Configuring Lock Level Settings To Configure the Lock Level settings Enter the Current lock level Password Viewing Contact Information To View Cisco Contact Information Viewing Diagnostic Logs To View the Diagnostic Log Messages Viewing the Usage Counters To View the Device Usage CountersClear Device Status Description Performing Service Actions To Load a Software Version D9865 Satellite Receiver Installation and Operation Guide Chapter Customer Information Training Support Warranty and Post-Warranty SupportProduct Support Customers Location Phone Number Case of a Fault Customer ResponsibilityCase of Repair Returning Products Obtaining an RMA Number and Shipping Address Packing and Shipping the Product D9865 Satellite Receiver Installation and Operation Guide Chapter Service and Maintenance General Alarms Message Cause/Remedy Description Severity TypeMessages D9865 Receiver Message List Alarm Message Cause/Remedy Description Severity Type DL APP Reboot Production Alarm Message Message Cause/Remedy Description Severity Type NVS Flash Alarm Message Message Cause/Remedy Description Alarm Message Cause/Remedy Description Severity Type Alarm Message Cause/Remedy Description Severity Type Record LNB PS Alarm Message Cause/Remedy Description Severity Type Alarm Message Cause/Remedy Description Severity Type Alarm Message Cause/Remedy Description Severity Type Alarm Message Cause/Remedy Description Severity Type Message Cause/Remedy Description Type Message Cause/Remedy Description Type Message Cause/Remedy Description Type PRI Hdcp Troubleshooting Problem Cause Remedy Quick Setup Instructions, Problem Cause Remedy D9865 Satellite Receiver Installation and Operation Guide Appendix a Technical Specifications This Appendix Receiver Specifications Parameter SpecificationTuner Symbol Rate Stability LNB RequirementsDVB-S and DVB-S2 DVB-S Eb/No C/N Ratio DVB-S Eb/No C/N RatioConvolutional FEC Rate Eb/No Ratio dB At DVB Threshold DVB-S2 Error Rate Performance ES/No C/N Ratio DVB-S2 Error Rate Performance Es/No C/N RatioMode Simulated Es/No dB for FEC Typical Performance dB Digital Audio/Video Output D9865H and D9865D only Video OutputAnalog Video Output HD Analog Video Output D9865H and D9865D only Digital Audio S/PDIF Output Audio OutputsAnalog Audio Output AAC General PowerAC Power Connector Mechanics Appendix B Default Settings Factory Default Settings Tuning/PresetParameter Default Preset Number Downlink 12.15 GHz Symbol Rate 28.3465 MS/s NetId Downlink 12.31 GHz Symbol Rate 30.0 Ms/s NetId Downlink 12.45 GHz Symbol Rate 30.5 MS/s NetId Preset Number 9 to LNB Setup Configuration 1 to LNB Setup Configuration Video Setup Subtitle Setup Audio Setup AdministrationYYYY-MM-DD IP Setup POV ModeAdvanced Administration Unicast IP Setup Trap Destination Setup Noise CutoffsDownload Parameter Default AW Banner Disable CI Setup Web GUI onlyAlarms and Warnings Import/Export Web GUI only D9865 Satellite Receiver Installation and Operation Guide Appendix C Lock Levels Level Description D9865 Satellite Receiver Lock LevelsVideo Parameter Lock Level All Screens Channel List EPG Grid TimersParameter Lock Level Set Timer EPG Info Favorites Edit Favorites Tuning/Preset Preset Tuning/PresetPresetLNBOne Button Channel Change button presses Dish Setup User Mode Dish Setup Installer Mode Subtitles BAT NIT SDT PAT Snmp Setup Change IP Address Alarms & Warnings Alarm SetupTrap Destinations Bootable App Selection Screen Info Applicable Notices and Disclaimer FCC NoticesIndustry Canada Notice Disclaimer Declaration of Conformity D9865 Satellite Receiver Installation and Operation Guide