Cisco Systems 4028650000000 Remote Control Functions, Remote Control Button Function, Fav, Last

Remote Control Functions

The remote control is provided as a standard feature with the D9865 Satellite Receiver. After unpacking your satellite receiver, check that you have the following accessories (if ordered):

•One IR (Infra-Red) Remote Control transmitter (RCU)

•Two AAA size batteries for Remote control (not included for Argentina)

The Remote Control is used to control receiver functions. You can switch the video/ audio outputs on and off plus activate and navigate the on-screen menus. Some remote control functions are duplicated on the front panel (see Front Panel LEDs, on page 3-3).

Remote Control	Button	Function
	DISPLAY	• Enables the video/audio outputs.
	0 to 9	• Enters channel numbers or information on
		on-screen menus.
		• Alphanumeric character entry for “Name”
		field on the on-screen menus (similar to keys
		on telephone keypad). If an entered value is
		out of range or conflicts with another setting,
		a pop-up message displays information
		about the error.
		00 (pressing 0 twice) – deletes a character at
		the cursor location.
		11 (pressing 1 twice) – adds a space at the
		cursor location.
	FAV	• Displays Favorite screen where you can
		view and set favorite channels.
	LAST	• Displays last channel.
	MENU	• Displays Main Menu.
		• Exits edit mode in menus.
		• Returns to video in video mode.
		• Returns to previous menu.

3-6 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C