ENG-25
Recording from Another VCR or CamcorderUsing the TV Buttons on theRemote Control ★(DVD-V540 Only)
You can copy a cassette to your DVD-VCR from
another video source, such as another VCR or a
camcorder.
☛
It is an infringement of copyright laws to copy
prerecorded cassettes or to re-record them in any
form without the permission of the owners of the
corresponding copyright.
1Connect the DVD-VCR, from which the cassette is
to be copied, to the appropriate RCAaudio and
video input connectors on the rear of your DVD-
VCR, as indicated on page 8.
2Insert a blank cassette in your DVD-VCR.
3Insert the pre-recorded cassette in the other video
source (VCR or camcorder).
4Press the INPUTSEL. button to select the
appropriate input on your DVD-VCR: LINE IN for
the RCAinput.
5Start playing back the cassette to be copied.
6Hold REC
(
●
)
down for a while to start recording
on your DVD-VCR.
7When you have finished recording, press
■
on
both VCR and DVD-VCR.
➢
If you wish to view the cassette being copied:
◆
Your DVD-VCR must be connected as usual to
the television (see page 7~8 for further details)
Your DVD-VCR remote control will work with Samsung
televisions and compatible brands.
To determine whether your television is compatible,
follow the instructions below.
1Switch your television on.
2Point the remote control towards the television.
3Hold down the TV button and enter the two-figure
code corresponding to the brand of your television,
by pressing the appropriate numeric buttons.
Brand Codes Brand Codes
SAMSUNG 01 to 06 PHILIPS 02, 20, 22
AKAI 09, 23 SABA 13, 14, 22 to 24
GRUNDIG 09, 17, 21 SONY 15, 16
LOEWE 02 THOMSON13, 14, 24
PANASONIC08, 23 to 27 TOSHIBA 07, 16 to 19, 21
Result: If your television is compatible with the
remote control, it will switch off. It is now
programmed to operate with the remote control.
‚
➢
If several codes are indicated for your
television brand, try each one in turn until
you find one that works.
☛
When you change the batteries in the remote
control, you must reprogramme the code, following
the same procedure.
You can then control the television using the following
buttons.
Button Function
STANDBY/ON Used to switch the television and
DVD-VCR on and off.
TV or VCR Used to switch between the TV and
VCR modes.
INPUTSEL. Used to select an external source.
VOL+ or – Used to adjust the volume of the
television.
PROG/TRK Used to select the required
( or ) programme.
TV MUTE Used to mute the volume of the
television.
➢
The various functions will not necessarily
work on all televisions. If you encounter
problems, operate the television directly.
00413B DVD-V540/XSG-ENG 5/6/04 12:07 PM Page 25