Selecting the Colour Mode, Please refer to | Samsung DVD-V440

Selecting the Colour Mode

NICAM ★ (DVD-V540/DVD-V440)

Before recording or playing back a cassette, you can select the required system standard.

➢When you playback an NTSC-recorded tape on this DVD-VCR make a setting on the colour system according to your TV. If your TV is a PAL system only TV, set NTPB.

If your TV is Multi System TV (NTSC 4.43 compatible), set NT4.43 and you can record NT4.43.

1After pressing the MENU, press the OK or ❿. Result: The Setup menu is displayed.

2 Press the corresponding ,❷ buttons to select the User Set option.

3Press the OK or ❿ to select this option. Result: The User Set menu is displayed.

		User Set
Colour System	: Auto	Auto
Colour System	: Auto	PAL
NICAM	: On	MESECAM
IPC	: On	B/W

4 Press the corresponding ,❷ buttons, until the Colour System option is selected.

5Press the OK or ❿ button to select Auto ➝ PAL➝ MESECAM ➝ B/W.

B/W Black and White

6On completion, press RETURN three time to exit the menu.

NICAM programmes are divided into 3 types. NICAM Stereo, NICAM Mono and Bilingual (transmission in another language). NICAM programmes are always accompanied by a standard mono sound broadcast and you can select the desired sound.

Please refer to page 21.

1After pressing the MENU, press the OK or ❿. Result: The Setup menu is displayed.

2 Press the corresponding ,❷ buttons to select the User Set option.

3Press the OK or ❿ to select this option. Result: The User Set menu is displayed.

			User Set
	Colour System	: Auto	On
	NICAM	: On
			Off
	IPC	: On

4	Press the corresponding		,❷ buttons, until the
	NICAM option is selected.
5
	To...	Press	OK or ❿, until...

	Mono mode	Off is displayed.
		Off: Only set at this position to
		record the standard mono
		sound during a NICAM
		broadcast if the stereo
		sound is distorted due to
		inferior reception conditions.

	NICAM mode	On is displayed.
		On: Normally set at this
		position.

6On completion, press RETURN three times to exit the menu.

ENG-16

Image 17

Samsung DVD-V440, DVD-V340, DVD-V540 instruction manual Selecting the Colour Mode, Please refer to, OK or ❿, until

Contents

DVD-V540 DVD-V440 DVD-V340 Remote Control Overview DVD-V540DVD-V440/V340 Contents Following illustrations represent precautions Safety Instructions Characteristics Disc Type and CharacteristicsAudio Video DVD-V540 Front View of the DVD-VCR Rear View of the DVD-VCR Accessories DVD Deck is active DVD, CD, VCD, or Svcd is loaded Display IndicatorsInserting Batteries in the Remote Control Connect the coaxial cable as indicated on Connecting DVD-VCR to the TV using the RCA Cable ❷ buttons Plug & Auto Set upTuning Your Television for Deck Control Keys Your DVD-VCR contains a 24-hour clock and calendar used to Setting the Date and TimePress the corresponding Clock option Install option Presetting the Stations Automatically Install option Presetting the Stations Manually11 To...Then If you Then Changing the Preset Station Table Clearing a Preset StationPress the Clear button Same time on the television screen CH21 .. CH36 .. CH69 Selecting the RF OUT Sound Mode B/G-D/KSetting the DVD-VCR Output Channel OK or ❿, until Selecting the Colour ModePlease refer to Intelligent Picture Control Auto Power offScreen Messages On completion, press the Return button Selecting the Cassette Type Long play mode LP is displayedRepeat Play VHS Play Recording a Programme with Automatic Stop Recording a Programme ImmediatelyProtecting a Recorded Cassette Checking a Preset Recording Using the Timer Programming FeatureYou can check your preset recordings Result The Timer Programming menu is displayed Adjusting Picture Alignment Manually Cancelling a Preset RecordingSelecting the Audio Output Mode Playing a Cassette Playing a Sequence at Variable Speeds Playing a Cassette in Slow MotionPlaying a Sequence Frame by Frame Searching for a Specific Sequence Go To 00000 Stop Using the Tape CounterEnd Search Intro Scan Help of a second VCR Using the Assemble Edit FunctionYou wish to play back and/or copy Pictures taken with a camcorder Recording from Another VCR or Camcorder Using the TV Buttons on Remote Control DVD-V540 OnlyBrand Codes Brand Codes Button Function Digital Audio out Jack FeaturesChoosing a Connection OK or ❿button Setting Up the Language FeaturesPress the ,❷ buttons to select English Recorded Dolby Digital Out Setting Up the Audio OptionsMPEG-2 Digital Out Dynamic Compression Adjusts the brightness of the screen.On/Off Setting Up the Display OptionsTV Aspect Black Level About the Change Password Setting Up the Parental ControlThere are up to 8 rating levels on a disc About the Rating Level Before You Begin Receiver Connections Component Connections for DVD DVD-V540/DVD-V440 What is Progressive Scan? To play back using aspect ratio DVD Adjusting the Aspect Ratio EZ ViewIf you are using a 169 TV If you are using a 43 TV To make the screen disappear, press the INFO. button again Using the Display FunctionWhen Playing a DVD/VCD/CD Using the Subtitle button Using the Angle buttonChanging the Camera Angle Selecting the Subtitle Language Using the Audio button When playing a DVDPress OK Use the , ❿ buttons to select Stereo, or ❿ On VCD/CD Using the Mark Function DVD/VCD Using the Mark Function MP3/WMA PlayRecalling a Marked Scene Clearing a Mark CD-R MP3/WMA discs Program/Random playback Program Play CD/MP3/WMA Program Play & Random PlayRandom Play CD/MP3/WMA Return to the Album Screen CD-R Jpeg Discs Picture CD Playback Zoom DivX/XviD/MPEG4 Special Playback Features DVD-V540/DVD-V440 DivX/XviD/MPEG4 Playback DVD-V540/DVD-V440 DivX/XviD/MPEG4 Feature TableMPEG4 Supported MPEGs containing DivX can be divided into Video and Audio General Technical SpecificationsInput Output Problem Explanation/Solution Problems and Solutions VCR Problem Action Troubleshooting Guide DVDBefore requesting service troubleshooting This Appliance is Distributed by Electronics