Manuals / Radio Shack / Computer Equipment / Scanner

Radio Shack PRO-92 owner manual AM Mode

Models: PRO-92

1 72

Download 72 pages 29.87 Kb

Page 25

You can set each of the scanner’s channel storage banks to open or closed mode.

In open mode, the scanner scans signals transmitted in all systems. In closed mode, the scanner scans signals transmitted only under the following conditions:

•When the signals are in the FM mode.

•When the signals are in the LT, MO, or ED mode and the signal's ID code matches the programmed ID code.

•When the signals are in the PL or DPL mode and the signal's ID code matches the programmed ID code.

Note: When the signals are in the PL or DPL mode, the scanner receives all signals on a channel when the ID code is set to NONE.

You can also select the users or talk groups you want the scanner to receive in closed mode.

When you set a channel storage bank to open mode, + (open) appears under the bank’s number while scan- ning. When you set a channel storage bank to closed mode, – (closed) appears under the channel storage bank's number while scanning. Or, OPEN or CLOSED appears while the scanner is in manual mode or while the scanner is receiving a signal during scanning.

See “Changing the Open/Closed Mode” on Page 58 for more information about setting the open and closed modes.

AM Mode

This sets the scanner to receive transmissions using am- plitude modulation (AM). AM is used for aircraft, military, some amateur radio, and some government transmis- sions. When the scanner receives a transmission on a channel set to the AM mode, it always stops on the transmission.

About Your Scanner

25

Image 25

Radio Shack PRO-92 owner manual AM Mode

Contents

PRO-92 Handheld Scanner Contents Operation Special FeaturesCare Specifications TroubleshootingTrunking Operation General Guide to ScanningFeatures Scanner scans Features Scanning Legally FCC NoticePreparation Power SourcesUsing Batteries Preparation11 Replace the cover Charging Rechargeable BatteriesUsing AC Power PWR DC 9V jack Using Vehicle PowerConnecting an Optional Antenna Connecting the AntennaListening Safely Connecting AN EARPHONE/ HeadphonesUsing the Belt Clip Connecting AN Extension SpeakerTraffic Safety About Your Scanner Connecting the Clone CableLook AT the Keypad About Your Scanner Look AT the Display Understanding Banks 7 are turned off Search ModeChannel Storage Banks Search Banks Understanding CTCSS/DCSPL Codes DPL CodesOpen and Closed Modes Understanding Your SCANNER’S ModesAM Mode LTR E. F. Johnson Mode FM ModeMotorola Mode Edacs Mode Operation Turning on the Scanner and Setting SquelchBank Channel Manual Storing Known Frequencies Into ChannelsAssigning a Text Tag to a Channel Storing Text TagsAssigning a Text Tag to a Bank Press To Enter a Character from this Group Text Input ChartSearching a Preprogrammed Frequency Range Finding and Storing Active FrequenciesPress Func 9 w x y zCurrent Search Bank Changing a Search Range with a Preprogrammed Range Storing a Frequency While Searching for a Specified ChannelFunc then Tune Manually Changing a Search Range Scanning the ChannelsTurning Channel-Storage Banks Off and On Manually Tuning a FrequencyListening to the Weather Band Deleting Frequencies from ChannelsListening to a Weather Channel Displaying Weather MessagesUsing the Delay Function Special FeaturesLocking Out Channels Locking OUT Channels or FrequenciesReviewing the Lock-Out Channels Locking Out FrequenciesClearing a Locked-Out Frequency Reviewing Locked-Out FrequenciesClearing All Lock Out Frequencies in a Search Bank Locked-outPriority Special Features Changing the Frequency Step Changing the Receive ModeDisplay Description Range MHz Search Step kHz Using the AttenuatorUsing the Keylock Using the Display BacklightTurning the KEY Tone on and OFF Changing the Display ContrastCloning the Programmed Data from Scanner to Scanner Trunking OperationUnderstanding Trunking Programming Trunking Frequencies Setting Squelch for the Trunking ModeProgramming Motorola Trunking Systems UHF-Lo Offset Frequency Size Code Programming Fleet MapsTalk Group IDS Talk Group ID Hold Storing Talk Group IDsReviewing Locked-Out Talk Group IDs Locking Out Talk Group IDsClearing Talk Group IDs Clearing All Talk Group IDs in One BankOpen and Closed Modes Closed ModeMode Open Closed Changing the Open/Closed ModeGeneral Guide to Scanning US Weather Frequencies Guide to FrequenciesHam Radio Frequencies Birdie FrequenciesGeneral Guide to Scanning Typical Band Usage Guide to the Action BandsPrimary Usage VHF BandBand Allocation Abbreviations ServicesVHF Low Band- 29-50 MHz in 5 kHz steps Meter Amateur BandMeter Amateur Band- 50-54 MHz Aircraft Band- 108-137 MHzCm Amateur Band 420-450 MHz Government Band 406-420 MHzLow Band 450-470 MHz Frequency Conversion Problem Possible Cause Remedy TroubleshootingSquelch is not Resetting the Scanner RESETTING/INITIALIZING the ScannerDC 9V jack Care ResetInitializing the Scanner UHF T Specifications9V DC Specifications71 Limited One-Year Warranty