MANU-

LOCKING OUT CHANNELS OR FREQUENCIES

You can scan existing channels or search frequencies faster by locking out channels or frequencies that have a continuous transmission, such as a weather channel.

Locking Out Channels

To lock out a channel while scanning, press L/OUT when the scanner stops on the channel. To lock out a channel manually, select the channel then press L/OUT until L appears.

Notes:

You can still manually select locked-out channels.

If you lock out a channel that is set to a Motorola trunking mode while using the subaudible decoding mode, you can remove the lockout by removing then reapplying power to the scanner. This makes it easy to temporarily lock out trunking data channels.

To remove the lockout from a channel, manually select the channel and press L/OUT until L disappears.

Reviewing the Lock-Out Channels

To review all channels that are locked out, press

AL, then repeatedly press FUNC then L/OUT to view each locked-out channel. When you finish reviewing locked- out channels, press MANUAL.

Locking Out Frequencies

To lock out a frequency during a search, press L/OUT when the scanner stops on the frequency. The scanner locks out the frequency, then continues searching.

Notes:

The scanner does not store locked out frequencies during a search.

Special Features

41

Page 41
Image 41
Radio Shack PRO-92 owner manual Locking OUT Channels or Frequencies, Locking Out Channels, Reviewing the Lock-Out Channels