Locking Out Talk Group IDs
Note: You can only lock out talk group IDs when the scanner is in the closed mode (see “Open and Closed Modes” on Page 57).
1.Press PGM.
2.Press TRUNK.
3.Press FUNC, 
or 
to move the desired bank.
4.Press 
or 
to select the ID memory.
5.Press L/OUT to lock out the ID. L appears.
6.To remove the lockout from a trunking ID, manually select the ID memory, and press L/OUT until L dis- appears.
Reviewing Locked-Out Talk Group IDs
Note: You cannot clear all lockouts from a talk group at the same time.
1.Press PGM then TRUNK.
2.Press FUNC then L/OUT. The locked out ID appears. If the ID memory bank has no locked out ID, you hear the low beep tone.
3.Press FUNC then 
or 
to select a search bank.
Or, just press 
or 
to search for any locked out IDs in a bank.
Clearing Talk Group IDs
1.Press PGM then TRUNK.
2.Press FUNC, 
or 
to select ID memory.
3.Press FUNC then CL.
Clearing All Talk Group IDs in One Bank
You can clear all talk group IDs within a bank. This lets you quickly delete all talk group IDs from a bank (for ex- ample, if you want to use the bank to store a different set of talk group IDs).
56 | Trunking Operation |
