Func then Tune | Radio Shack PRO-92 instruction

•If bank 9 in the channel storage banks does not contain any empty channels, Bank 9 full. appears on the display’s lower line.

Storing a Frequency While Searching for a Specified Channel

1.When the scanner stops on the frequency, press

FUNC then TUNE.

2.Press MANUAL. Select the specified channel using a number key, then press MANUAL again.

3.Press PGM.

4.Press FUNC then TUNE to store the frequency.

5.If desired, press SEARCH to resume searching.

Changing a Search Range with a Preprogrammed Range

You can replace the search range with one of the pre- programmed ranges.

1.Press FUNC then SEARCH to enter search program mode. PSR and the search bank number of the cur- rent range appear at the display’s upper left corner.

2.Press or to select the search bank you want to replace.

3.Press FUNC then 5.?SR and the search bank num- ber appear at the display’s upper left corner.

36Operation

Image 36

Radio Shack PRO-92 owner manual Storing a Frequency While Searching for a Specified Channel, Func then Tune

Contents

PRO-92 Handheld Scanner Contents Special Features Operation Troubleshooting Care SpecificationsTrunking Operation General Guide to Scanning Features Scanner scans Features FCC Notice Scanning Legally Power Sources Preparation Using Batteries Preparation11 Charging Rechargeable Batteries Replace the cover Using AC Power Using Vehicle Power PWR DC 9V jack Connecting the Antenna Connecting an Optional Antenna Connecting AN EARPHONE/ Headphones Listening Safely Connecting AN Extension Speaker Using the Belt ClipTraffic Safety Connecting the Clone Cable About Your Scanner Look AT the Keypad About Your Scanner Look AT the Display 7 are turned off Search Mode Understanding BanksChannel Storage Banks Understanding CTCSS/DCS Search BanksPL Codes DPL Codes Understanding Your SCANNER’S Modes Open and Closed Modes AM Mode FM Mode LTR E. F. Johnson Mode Motorola Mode Edacs Mode Turning on the Scanner and Setting Squelch Operation Storing Known Frequencies Into Channels Bank Channel Manual Storing Text Tags Assigning a Text Tag to a Channel Assigning a Text Tag to a Bank Text Input Chart Press To Enter a Character from this Group Finding and Storing Active Frequencies Searching a Preprogrammed Frequency RangePress Func 9 w x y z Current Search Bank Storing a Frequency While Searching for a Specified Channel Changing a Search Range with a Preprogrammed RangeFunc then Tune Scanning the Channels Manually Changing a Search Range Manually Tuning a Frequency Turning Channel-Storage Banks Off and On Deleting Frequencies from Channels Listening to the Weather BandListening to a Weather Channel Displaying Weather Messages Special Features Using the Delay Function Locking OUT Channels or Frequencies Locking Out ChannelsReviewing the Lock-Out Channels Locking Out Frequencies Reviewing Locked-Out Frequencies Clearing a Locked-Out FrequencyClearing All Lock Out Frequencies in a Search Bank Locked-out Priority Special Features Changing the Receive Mode Changing the Frequency StepDisplay Description Using the Attenuator Range MHz Search Step kHz Using the Display Backlight Using the KeylockTurning the KEY Tone on and OFF Changing the Display Contrast Trunking Operation Cloning the Programmed Data from Scanner to Scanner Understanding Trunking Setting Squelch for the Trunking Mode Programming Trunking Frequencies Programming Motorola Trunking Systems UHF-Lo Offset Frequency Programming Fleet Maps Size Code Talk Group IDS Storing Talk Group IDs Talk Group ID Hold Locking Out Talk Group IDs Reviewing Locked-Out Talk Group IDsClearing Talk Group IDs Clearing All Talk Group IDs in One Bank Closed Mode Open and Closed Modes Changing the Open/Closed Mode Mode Open ClosedGeneral Guide to Scanning Guide to Frequencies US Weather FrequenciesHam Radio Frequencies Birdie Frequencies General Guide to Scanning Guide to the Action Bands Typical Band UsagePrimary Usage VHF Band Abbreviations Services Band Allocation Meter Amateur Band VHF Low Band- 29-50 MHz in 5 kHz stepsMeter Amateur Band- 50-54 MHz Aircraft Band- 108-137 MHz Government Band 406-420 MHz Cm Amateur Band 420-450 MHzLow Band 450-470 MHz Frequency Conversion Troubleshooting Problem Possible Cause RemedySquelch is not RESETTING/INITIALIZING the Scanner Resetting the ScannerDC 9V jack Reset CareInitializing the Scanner Specifications UHF T 9V DC Specifications71 Limited One-Year Warranty