Note: After you press FUNC, press 5 within about 3 seconds. Otherwise, begin over at Step 1.
4.Press 
or 
to select the preprogrammed search range.
5.Press ENTER to replace the search range, then press SEARCH to begin searching.
Manually Changing a Search Range
1.Press FUNC then SEARCH to enter search program mode. PSR and a search bank number appear at the display’s upper left corner.
2.Press 
or 
to select the search bank number.
3.Use the number keys to enter the lower range you want to search and store, then press ENTER to store the frequency.
4.Use the number keys to enter the higher range you want to search and store, then press ENTER again to store the frequency.
Notes:
•If you enter a higher frequency first then enter a lower frequency, the scanner automatically exchanges the frequencies on the display. It dis- plays the lower frequency first and the higher fre- quency second.
•You cannot span across frequency bands. When manually setting search ranges, if you enter fre- quencies on different bands, the scanner does not accept the entry.
5.To assign a new name to the search range, press TEXT twice then enter the name. If you want to edit existing text, repeatedly press 
or 
to move the cursor across the text. Enter the appropriate text and press ENTER, then press SEARCH to resume searching.
SCANNING THE CHANNELS
To begin scanning channels or to start scanning again after monitoring a specific channel, press SCAN.
Operation37
