Quadra-Fire QFP44 Appliance Setup, A. Remove Glass Assembly, C. Install the Refractory

14 Appliance Setup

WARNING! Risk of Fire and Electric Shock! Use ONLY Hearth & Home Technologies-approved optional acces- sories with this appliance. Using non-listed accessories could result in a safety hazard and will void the warranty.

A. Remove Glass Assembly

WARNING! Risk of Asphyxiation! Handle xed glass assembly with care. Inspect the gasket to ensure it is undamaged and inspect the glass for cracks, chips or scratches.

•DO NOT strike, slam or scratch glass.

• DO NOT operate replace with glass removed, cracked, broken or scratched.

•Replace as a complete assembly.

The glass assembly can be removed from the unit by pulling and releasing the glass latches. There are three across the top, three across the bottom, and one in the center of each side.

The glass assembly is heavy. Use caution when remov- ing.

Glass

Latches

C. Install the Refractory

•Remove the refractory retainer from each side of the rebox.

•Put the left side refractory in place and reinstall the left side refractory retainer.

Refractory Retainer

Figure 14.2 Install Left Side Refractory

•Install the lower back refractory.

Figure 14.1 Glass Assembly Removal Figure 14.3 Install Lower Back Refractory

B. Clean the Appliance

Clean/vacuum any sawdust that may have accumulated inside the rebox or underneath in the control cavity.

Quadra-Fire • QFP44 • 4051-300 Rev M • 09/08 53