4 | Getting Started | Installer Guide |
|
|
A. Typical Appliance System
NOTICE: Illustrations and photos re ect typical installations and are for design purposes only. Illustrations/diagrams are not drawn to scale. Actual product may vary from pictures in manual
Note: Dual venting con gurations
ARE NOT allowed. Appliance
MUST be vented EITHER vertically
OR horizontally.
Vertical Termination Cap (SECTION 10)
Noncombustible roof 
flashing maintains minimum 
clearance around pipe 
(SECTION 10) 
Storm Collar (SECTION 10)
Vent pipe penetrates roof, preferably without affecting roof rafters
(SECTION 8)
Vent Pipe 
(SECTIONS 7, 8, 10) 
Ceiling Firestop on floor of attic (SECTION 8)
Framing/Header (SECTION 5)
Attic insulation shield (not shown) must be used here to keep insulation away from vent pipe if attic is insulated. (SECTION 8)
Framing Headed off in Ceiling Joists (SECTION 8)
Optional
Wall Switch
Mantel & Mantel Leg 
(SECTION 13)
Surround
Hearth Extension (not required)
Gas Line 
(SECTION 11)
Figure 4.1 Typical System
22 |
