1.LOW - Battery power low. Replace batteries within two weeks.

2.TIMER - Indicates time remaining before system shuts off, when timer- programmed, 9 - hour maximum setting.

3.MODE - Indicates operation MODE of system. ON indicates the system is on, either manually or thermostatically. THERMO indicates the system will automatically cycle ON/OFF, depending on programmed SET temperature. OFF indicates the entire system is turned off.

4.SET - Indicates desired SET room temperature for THERMO operation.

5.FLAME - Single or double Flame/Hi icon indicates burner/valve operational.

6.CLOCK - Indicates the current time in AM/PM.

7.ROOM - Indicates CURRENT room temperature.

8.°F - Indicates degrees Fahrenheit (°C indicates degrees Celsius).

9.FAN - Indicates fan is on or programmed to come on. Three speed settings are available.

MODE

SET UP

TIMER DOWN TIME

FAN FLAME

Figure 2.6 Transmitter LCD Display Screen

Matching Security Codes

It may be necessary to program the remote receiver to the security code of the transmitter upon initial use, if bat- teries are replaced, or if a replacement transmitter is pur- chased from your dealer. To program the remote receiver:

Set the slide button on the receiver to the REMOTE position.

Push the LEARN button (one beep will be heard) on the top of the remote receiver.

Then press the MODE button on the transmitter. Several beeps indicate the transmitter’s code has been programmed into the receiver. When an existing receiver is matched to a new transmitter, the new security code will overwrite the old one.

NOTE: When the LEARN button is depressed, “beeping” sounds should be heard. If no “beeping” is heard check to see that the receiver has 110-120VAC power to it.

If you are unsuccessful in matching the security code on the rst attempt, wait 1-2 minutes before trying again.

Operating Instructions

To operate the system, press the MODE button (Figure 13.4) on the transmitter to select the operational MODE desired.

ON indicates the system is on, either manually, timed or thermostatically.

THERMO indicates the system will automatically cycle ON/OFF, depending on programmed set temperature.

OFF indicates the entire system is turned off.

Transmitter Settings

Flip open the plastic cover on the front of the transmitter to expose the “SET” buttons.

NOTE: Flashing numbers on the display indicate the system is waiting for input, such as using the UP and DOWN buttons to program a new setting. If no change is made to ashing digits within 15 seconds, the system will complete the procedure last programmed and reset the display to its normal state.

Setting the Clock

Press and hold the TIMER/TIME button on the transmitter for more than two seconds. The hour digit(s) will begin ashing (see Figure 13.4, Location #6).

Press the UP or DOWN button until the desired hour is displayed in AM or PM.

After setting the desired hour, press and release the TIMER/TIME button again to set the minutes; the minute digits will begin ashing.

Press the UP or DOWN button until the desired minutes are displayed.

Press and hold the TIMER/TIME button again for more than two seconds. The time digits will cease ashing, indicating the clock has been successfully set. You may also press the SET button on the transmitter to stop the time digits from ashing and set the time.

Quadra-Fire • QFP44 • 4051-300 Rev M • 09/08

13

Page 13
Image 13
Quadra-Fire QFP44 owner manual Matching Security Codes, Operating Instructions, Transmitter Settings, Setting the Clock

QFP44 specifications

The Quadra-Fire QFP44 is a highly efficient and versatile pellet stove designed to provide warmth and comfort while offering a range of advanced features and technologies. It stands out in the market for its blend of efficiency, user-friendly operation, and aesthetic appeal.

One of the key features of the QFP44 is its impressive heat output. With a heating capacity of up to 2,500 square feet, it is suitable for medium to larger living spaces, making it an ideal choice for families looking for an effective heating solution. The stove boasts an adjustable output, allowing users to set the heat level according to their specific needs, which promotes energy efficiency and enhances comfort.

The QFP44 utilizes a patented feed system that ensures a consistent and reliable supply of pellets for combustion. This technology not only maximizes fuel efficiency but also minimizes the need for frequent refueling. In addition, the stove features a large hopper capacity, capable of holding up to 45 pounds of pellets. This translates into longer burn times, enabling users to enjoy hours of warmth without constant supervision.

Another notable characteristic of the QFP44 is its advanced control system. The innovative electronic control board allows users to monitor and adjust the stove settings easily. The system includes programmable temperature settings, which enable homeowners to schedule heating times according to their lifestyle. This convenience makes the stove ideal for those who want to return to a warm home without wasting energy.

The QFP44 is also engineered with a clean-burning technology that significantly reduces emissions. This feature not only makes the stove environmentally friendly but also enhances its safety profile. The high-efficiency combustion system effectively converts pellets into heat with minimal smoke and pollutants, fulfilling strict environmental standards.

For aesthetic appeal, the QFP44 is designed with a contemporary look, featuring a large viewing window that allows users to enjoy the beautiful ambiance of the flame. The stove is available in various finishes, making it a stylish addition to any home décor.

Overall, the Quadra-Fire QFP44 combines efficiency, user-friendly technology, and an elegant design, making it a top choice for anyone seeking an effective and attractive pellet heating solution. Its blend of features ensures homeowners can enjoy both comfort and convenience during the cold months while maintaining an environmentally responsible heating option.