4.Firmly press the cover against the chassis and slide the cover towards the front of the chassis until it locks in place.
Note: If the right side cover does not slide all the way to the front of the chassis, check that the cover tabs at the left side of the cover are properly inserted into their slots in the chassis.
5.Replace the three previously removed screws.
6.Replace the left side cover (see “Replacing the Left Side Cover” earlier in this chapter).
7.Reconnect all external peripherals.
8.Plug in your power cables.
System Board Options
his section describes how to upgrade options on the system board. Procedures described in this section include:
Tadding memory modules upgrading the processor.
The following figure shows the locations of the sockets and connectors on the system board.
