NEC VT 300 Series manual Startup

TSet the voltage switch correctly for your area. The correct setting for the U.S. and Canada is 115V.

!WARNING

Set the voltage switch correctly for your area.

Connect system power cables to a surge protector (recommended) or a properly grounded wall outlet.

!CAUTION

NEC CSD recommends connecting the power cable to a surge protector.

Startup

Press the power button to start up your system. The power lamp lights green to indicate that the system is on. The system performs its Power-On Self-Test (POST) and several messages appear indicating that your system is checking its subsystems. To see the messages, press Tab during POST.

At the bottom of the NEC startup screen, the following message appears:

Press F2 to enter BIOS Setup

If you want to enter the BIOS Setup, immediately press F2 while the startup screen displays.

One beep indicates that the system has successfully completed the power-on test. After a short delay, Windows starts up.

Setting Up the System 2-3