NEC VT 300 Series manual Power-SavingOperation

3.Click Start on the taskbar, then point to and click Shut Down. Selecting Shut Down gives you several choices in the pop-up submenu. Select Shut down the computer, then click Yes or press Enter for shut down.

4.If your system is configured with Windows 98, the system shuts down automatically after a short interval.

Note: You can also power off the system by pressing the power button and holding it in for several seconds before releasing. The system powers off after a short delay.

5.If your system is configured with Windows 95 or Windows NT, shut down the system by pressing and holding in the power button for several seconds before releasing.

6.Turn off power to your monitor.

Power-Saving Operation

If the system is running Windows 95 or Windows 98, you can put it in Sleep mode (a power-saving state) by lightly pressing and immediately releasing the power button on the front of your unit. The Sleep mode is a convenient way of conserving energy when you are going to be away from your system for a short period of time.

The system also goes into Sleep mode when it has been inactive, if the power management has been enabled in BIOS, and an inactivity timeout has been enabled. (See Chapter 3, “Configuring Your System” for information on setting power management functions.)

Setting Up the System 2-5