NEC VT 300 Series manual Speaker Problems

TThe drive plays music CDs but the sound is not heard. However, .WAV and .MIDI sounds can be heard when played.

Check that the cable connecting from the rear of the drive to the system board CD audio connector is in place and secure.

Check the CD Audio volume setting.

Speaker Problems

Check the following problems to see the possible cause and solution.

No sound from the speakers.

Check that the speaker power is on. Verify that all speaker cable connections are correct and secure.

Check that the speaker’s AC adapter is plugged into a properly grounded AC power outlet.

Speaker volume is too low.

Adjust the volume control on the speaker. If the volume is still too low, adjust the volume through the system

Tsoftware. See your Windows Multimedia online help.

Sound is only coming from one speaker.

Balance the speaker output by adjusting the balance in the sound software. See your Windows Multimedia online help.

5-8 Solving System Problems