NEC VT 300 Series manual Main Menu Items, 3-10Configuring the System, Settings default is bold

	Main Menu Items
Menu Item	Settings (default is bold)
Type	None, CD-ROM, IDE Removable, User,
	ATAPI Removable, Auto
	Defaults to Disabled and changes at boot
	time based on auto-detection. When set to
	Auto, the values for Cylinders, Heads,
	Sectors, and Maximum Capacity are
	displayed but are read only.
	When set to Auto, the BIOS detects what the
	drive is capable of, not the translation
	mechanism that was used to format the drive.
	If a drive is run in a mode other than the
	mode in which it was partitioned and
	formatted, unpredictable results may occur,
	including data loss.
Cylinders	When Type is Auto, value in the Cylinders
	field is auto-detected and field is read only.
Write Precompensation	When Type is Auto, value in Write Pre-
	compensation field is auto-detected and field
	is read only.
Heads	When Type is Auto, value in Heads field is
	auto-detected and field is read only.
Sectors	When Type is Auto, value in Sectors field is
	auto-detected and field is read only.
Maximum Capacity	xxxx MB
LBA Mode	On, Off
	When On is selected, it causes logical block
	addressing to be used in place of cylinders,
	heads, and sectors.
	When Type is set to Auto, the value in the
	LBA Mode field is auto-detected and the field
	is read only.

3-10 Configuring the System