NEC VT 300 Series manual Tdealer or the NEC CSD Technical Support Center

TNon-System Disk error message displays when the system is started.

You have a diskette in the diskette drive, and the diskette drive is set before the hard drive in boot order. Remove the diskette from drive A and restart the system.

Operating system not found error message displays when the system is started.

If you left a CD in the CD-ROM drive, your system may not be able to boot. Try removing the CD and rebooting.

Your hard drive might need more time to spin up before the system boots. Change the “Hard Disk Pre-Delay” to a higher setting (see BIOS Setup Advanced Menu in Chapter 3.)

System does not boot and error message displayed on screen.

Run the Setup Utility (see Chapter 3). Check that the parameters are set correctly, particularly if you just installed an option.

System emits continuous beeps.

Turn the system off, wait at least five seconds, and turn the system on. If the beeps continue, call your NEC CSD

Tdealer or the NEC CSD Technical Support Center.

System does not maintain date, time, system configuration information.

Change the battery (see “Battery Replacement” in this chapter). For assistance, call your NEC CSD dealer or the NEC CSD Technical Support Center.

Solving System Problems 5-3