Samsung SF-560 manual Clearing LCD Error Messages, Manual Feeder, Tips for Avoiding Paper Jams

In the Manual Feeder

“ ” appears on the display when you try to print using the

manual feeder and the machine does not detect paper, due to no paper or improper paper loading.

The error message may also occur when the paper is not properly fed into the machine through the manual feeder. In that case, pull the paper out of the machine.

Tips for Avoiding Paper Jams

By selecting the correct paper types, most paper jams can be avoided.

When a paper jam occurs, follow the steps outlined in page 6.3.

•Follow the procedures on page 1.9 when you load paper. Ensure that the adjustable guides are positioned correctly.

•Do not overload the paper tray. Ensure that the paper is below the paper capacity mark on the inside wall of the paper tray.

•Do not remove the paper from the tray while your machine is printing.

•Flex, fan and straighten the paper before loading.

•Do not use creased, damp or highly curled paper.

•Do not mix paper types in the paper tray.

•Use only recommended print materials. See “Paper Specifications” on page A.5.

•Ensure that the print side of print materials is facing down in the paper tray and facing up in the manual feeder.

Clearing LCD Error Messages

	Messages appears on the display to indicate the control panel to indicate		6
	the machine’s status or errors. Refer to the following table to understand
	the message’s meaning and correct the problem, if necessary. Messages
	and their meanings are listed in alphabetical order.
Display	Meaning	Suggested solutions
Cancel ?	Your machine’s memory is full	To cancel the fax job, press the 1
1:Yes 2:No	during the machine stores the	button to accept “Yes”
	document into the memory.	If you want to send the pages were
		stored, press the 2 button to accept
		“No.” You should send the remaining
		pages later when the memory is
		available.

TROUBLESHOOTING 6.5