![](/images/new-backgrounds/1200564/20056463x1.webp)
Setting Sounds | 1 | |
You can control the following sounds: | ||
|
•Ringer: You can adjust the ringer volume.
•Key Sound: With this option set to “On,” a key tone sounds each time any key is pressed.
•Alarm Sound: You can turn the alarm sound on or off. With this option set to “On,” an alarm tone sounds when an error occurs or fax communication ends.
•Speaker: You can turn on or off the sounds from the telephone line through the speaker, such as a dial tone or a fax tone. With this option set to “Comm.,” the speaker is on until the remote machine answers.
You can adjust the speaker volume level using the On Hook Dial button or the handset.
Speaker, Ringer, Key Sound and Alarm Sound
1Press Menu until “Sound/Volume” appears on the top line of the display.
2Press the scroll button (W or X) to scroll through the options. Press Enter when you see the sound option you want.
3Press the scroll button (W or X) to display the status or loudness you want for the option you have selected.
For the ringer volume, you can select from “Off”, “Low”, “Med” and “High.” Setting “Off” means that the ringer turns off. The machine works normally even if the ringer is turned off.
4Press Enter to save the selection.
5If necessary, repeat steps 2 through 4.
6To return to Standby mode, press Stop/Clear.
Speaker Volume
To adjust the volume using the On Hook Dial button:
1Press On Hook Dial. A dial tone sounds from the speaker.
2Press the scroll button (W or X) until you hear the loudness you want. The display shows the current volume level.
3Press Stop/Clear to save the change and return to Standby mode. To adjust the volume using the handset:(For USA only)
1Pick up the handset. A dial tone sounds from the earpiece.
2Press the scroll button (W or X) until you find the loudness you want. You can select either “High” or “Low.”
3Press Enter to save the selection and replace the handset.
NOTE: You can adjust the speaker volume only when the telephone line is connected.
GETTING STARTED 1.17